will realism overhaul be built into kerbal space program 2

Will realism overhaul be built into kerbal space program 2 free#

It takes about 20 seconds to spool up the engines, but I've got mixed feelings about it. I wanted to release this version without further delay, so Fregat is out for the time being. RP-1), it should be easy to make the Soyuz configurable as either U or U2. I'll need to talk to Nathan about that, but since the only difference here is propellant (Synthin vs. MFT can simulate that, so I'll try to do it. Also, it's main engine isn't really throttleable, but instead has 3 modes with different thrusts and Isps. I'll get to that eventually, but I need a few additional models for this. Currently, Soyuz spacecraft needs a few tweaks, most notably to it's attitude control and electrical systems. I'll try to implement that in a future release. This Soyuz is slightly overpowered, because I didn't simulate the H2O2 load that drives the turbopump on the real thing nor the N2 for tank pressurization. I kind of hope to write multiple ascent programs for various orbits and maybe rendezvous programs to simulate the Kurs docking system. After that, stage and deploy the Soyuz ('3'). Cut off the 3rd stage when Pe is at the altitude you want it on. After you pass the Ap (stage still burning), pitch up slightly (5 or so degrees) so that Ap stops to rise. After jettisoning the 2nd stage, remember to stage again to activate 3rd stage gimbal and jettison it's engine fairing. Just before 2nd stage burnout (Ap should be 200-220km, you could tweak it), disable autopilot and drop the nose to the horizon. Jettison boosters when empty, jettison SAS (press '1') and fairings after passing the edge of second thickest atmosphere layer. Turn start should be at 0.5km, with the grade being 35%. To launch the Soyuz, set Ap to about 250km and turn end to the same altitude. Mind you, this wasn't really tested on a prolonged mission. They include basic food and water support.

Also, here are the modified configs for Ioncross. The Soyuz uses MFT, Ioncross Crew Support, Engine Ignitor, Deadly Reentry, MechJeb2 (looking to switch to kOS in the near future), FAR and KJR. The configs are a drop-in replacement for BobCat's configs and require the latest Soviet Pack to work. So, without much further ado: Soyuz-TMA v.1.0, real scale.

Will realism overhaul be built into kerbal space program 2 free#

Everything's fine now, though you're still free to play around with the ascent. If you burn it to depletion, you might end up with something silly like 200x800 orbit.Īlso, Asmi, disregard the PM I sent you. With this removed, you actually need to shut 3rd stage down early, because the equatorial orbit is so much more effecient. Strangely, I didn't forgot about this when setting Soyuz ST decoupler mass (it massed 0.5). It turned out that it had mass of 1.5, which made the whole rocket weight one ton too much. Success! You know what was the problem with Soyuz? All the bloody time I was running with an overweight 3rd stage! And why's that? I forgot to account for the cargo decoupler when setting stage mass.